How to Change Programming Code on Garrison Electronic Deadbolt

In an age where security and convenience go hand in hand, electronic deadbolts are fast becoming a household essential. Among the many available brands, Garrison electronic deadbolts stand out due to their balance of affordability, reliability, and user-friendly design. Whether you’re safeguarding your home, rental unit, or office, understanding how to program your Garrison lock properly ensures that you take full advantage of its features.

This in-depth guide covers everything from initial setup to advanced configuration and troubleshooting tips. Whether you’re a homeowner, a DIY enthusiast, or a property manager, this comprehensive resource will help you master your Garrison electronic deadbolt.

Contents show

Understanding the Garrison Electronic Deadbolt

Key Features

Garrison’s electronic deadbolt offers:

Backlit Keypad: Easy visibility in low light.
Auto-Lock Functionality: Automatically secures your door after a preset time.
Multiple User Codes: Support for multiple unique access codes.
One-Touch Locking: Lock your door quickly with a single button press.
Manual Key Override: Always have a mechanical backup.
Sound Control: Enable or disable audio feedback.

What’s Included in the Box?

Exterior keypad assembly
Interior assembly with thumb-turn and battery housing
Deadbolt latch
Mounting hardware
Installation guide and programming instructions

Make sure to verify that all components are present before beginning installation.

Installation and Power Setup

Step 1: Physical Installation

Follow the included instruction manual for step-by-step installation:

Remove the existing deadbolt.
Install the latch bolt into the door’s side edge.
Attach the exterior keypad to the outside of the door.
Connect the cable to the interior unit.
Secure the interior assembly using mounting screws.

Ensure everything is aligned and functional before proceeding.

Step 2: Insert Batteries

Remove the battery cover from the interior assembly.
Insert 4 AA alkaline batteries (avoid rechargeable types).
Replace the cover.
The unit will beep and the keypad will light up, indicating it is powered.

Avoid mixing old and new batteries or different brands.

Default Codes and Security

When powered on for the first time, the deadbolt is set to factory defaults:

Default Programming Code: 0000
Default User Code: 1234

These codes must be changed immediately for optimal security.

How to Program Your Garrison Deadbolt

Changing the Programming Code

This master code allows you to modify settings and add/delete user codes.

Steps:

Press the Program button on the interior unit.
Enter the current programming code (default: 0000).
Press 1.
Enter your new programming code (4-6 digits).
Press # to save.

Tip: Write your new code down and store it securely.

Adding a User Code

Assign individual user codes for family members, tenants, or service personnel.

Steps:

Press the Program button.
Enter your programming code.
Press 2.
Input a new 4-6 digit user code.
Press # to save.

You should hear a confirmation beep and see a green light.

Deleting a Specific User Code

Steps:

Press the Program button.
Input the programming code.
Press 3.
Enter the user code to delete.
Press # to confirm.

No sound or error indicates success.

Deleting All User Codes

Use this if you’re transferring ownership or starting fresh.

Steps:

Press the Program button.
Enter the programming code.
Press 4.
Press # to confirm deletion of all user codes.

Now you must reprogram new user codes for continued access.

Enabling Auto-Lock

Automatically locks the door after a set period of inactivity.

Steps:

Press the Program button.
Enter the programming code.
Press 5.
Enter the number of seconds (10-99) for the delay.
Press # to activate.

To disable, repeat the process and enter 00 as the delay.

Toggle Lock Sound

Choose silent or audible operation.

Steps:

Press the Program button.
Input the programming code.
Press 6.

You’ll hear a beep if the sound has been enabled or disabled.

Advanced Setup Options

Changing the Lock’s Direction

Some installations require the deadbolt to adjust for right- or left-hand doors.

Steps:

Remove the battery cover.
Hold down the Program button.
Remove one battery while holding the button.
Reinsert the battery.
Wait for the lock to auto-calibrate and release the button.

The lock now recognizes the door’s orientation.

Restoring Factory Defaults

Reset all codes and settings:

Steps:

Remove the battery cover.
Press and hold the Program button.
Remove one battery while continuing to hold.
Reinsert the battery.
Hold the Program button for 10-15 seconds.
Release after hearing the long beep or blinking light.

Your lock is reset to factory defaults. Programming and user codes will revert.

Troubleshooting Common Issues

Issue	Solution
Lock doesn’t respond	Replace batteries or check cable connections
Can’t add new codes	Verify programming code is correct
Lock beeps but won’t engage	Ensure door is closed and latch is aligned properly
Forgotten programming code	Perform a factory reset
Keypad is unlit or unresponsive	Check batteries and ensure correct polarity

Note: Always use alkaline batteries for optimal performance.

Best Practices for Security and Maintenance

Security Recommendations

Change codes regularly.
Never share programming code.
Use different user codes for different people.
Deactivate unused codes.
Keep a mechanical key as backup.

Maintenance Tips

Check and replace batteries every 6-12 months.
Keep keypad clean and free of dust.
Lubricate the latch with silicone spray, not oil.
Tighten screws if lock feels loose.
Test all codes monthly to ensure function.

Ideal Use Cases

Garrison deadbolts are versatile. Common use cases include:

Residential Homes

Parents and kids can each have their own code.
No lost keys or lockouts.

Rental Properties

Change user codes between guests.
Remote access control through code sharing.

Home Offices

Secure work-from-home spaces.

Vacation Homes

Program temporary codes for guests or contractors.

Summary of Key Programming Sequences

Action	Key Sequence
Change Programming Code	`P` > Current Code > `1` > New Code > `#`
Add User Code	`P` > Programming Code > `2` > User Code > `#`
Delete User Code	`P` > Programming Code > `3` > User Code > `#`
Delete All Codes	`P` > Programming Code > `4` > `#`
Enable Auto-Lock	`P` > Programming Code > `5` > Delay > `#`
Disable Auto-Lock	`P` > Programming Code > `5` > `00` > `#`
Toggle Sound	`P` > Programming Code > `6`

Conclusion: Take Control of Your Security

Programming a Garrison electronic deadbolt may seem intimidating at first, but once you understand the steps, it becomes a simple, empowering task. From setting up custom user codes to enabling automatic locking features, the lock is designed with both security and convenience in mind.

Use this guide as your go-to resource for setup, maintenance, and everyday use. Whether you’re managing a home, office, or multiple rental units, mastering your Garrison deadbolt will ensure safety and peace of mind.

Have specific questions or model-related issues? Check the user manual that came with your device or contact Garrison customer support for detailed help.